Enterasys Intrusion Prevention System Manual page 106

Configuring the Protocol Analysis Module
a.
b. Select the direction of the traffic to be analyzed and click OK.
9. To add a Port Macro to the port list, click Add PortMacro. The Port Macro Selection dialog
box is displayed. Select the desired macro and click OK.
2-76 Creating Network Sensor Policies
Select the type of port to add or exclude, then enter the port number or low and high
numbers for a range. Refer to
Note: To display existing port macros and their definitions, or to add a new macro, click Default
Network Sensor Settings in the Network Policies tab of the Network Policy View. See
"Configuring Port Macros" on page 1-14 for information about creating or editing port macros.
Table 2-1 on page 2-8 for a list of common port numbers.