Intel® Workstation Board S5000XVN TPS
5.5.3
SATA/SAS Connectors
The workstation board provides up to six SATA/SAS connectors:
SATA-0 (J1J1)
SATA-1 (J1H2)
SATA-2/SAS-0 (J1H1)
SATA-3/SAS-1 (J1G2)
SATA-4/SAS-2 (J1G1)
SATA-5/SAS-3 (J1F2)
The pin configuration for each connector is identical and is defined in the following table:
Table 25. SATA/SAS Connector Pin-out (J1J1, J1H2, J1H1, J1G2, J1G1, J1F2)
Pin
1
2
3
4
5
6
7
5.5.4
Serial Port Connectors
The workstation board provides one external DB9 Serial A port (J7A1) and one internal 9-pin
serial B header (J1B1). The following tables define the pin-outs.
Revision 1.5
Signal Name
GND
SATA/SAS_TX_P_C
SATA/SAS_TX_N_C
GND
SATA/SAS_RX_N_C
SATA/SAS_RX_P_C
GND
Table 26. External DB9 Serial A Port Pin-out (J7A1)
Pin
Signal Name
1
SPA_DCD
2
SPA_SIN_L
3
SPA_SOUT_N
4
SPA_DTR
5
GND
6
SPA_DSR
7
SPA_RTS
8
SPA_CTS
9
SPA_RI
Intel order number: D66403-006
Connector/Header Locations and Pin-outs
Description
Ground
Positive side of transmit differential pair
Negative side of transmit differential pair
Ground
Negative side of receive differential pair
Positive side of receive differential pair
Ground
Description
DCD (carrier detect)
RXD (receive data)
TXD (Transmit data)
DTR (Data terminal ready)
Ground
DSR (data set ready)
RTS (request to send)
CTS (clear to send)
RI (Ring Indicate)
41