Intel S5000PSLSAS Configuration Manual page 14


Chassis intrusion switch assembly

The chassis is designed to work with the boxed Intel
sink.
8)
The production SC5299DP SKU includes:

Non-redundant 550-W PFC power supply

One non-redundant cooling fan

Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.
Note: Check the Power budget spreadsheet for supportable hard drive, memory, and PCI configurations.

Cables (one each):




Chassis intrusion switch assembly

The chassis is designed to work with the boxed Intel
heat-sink.
9)
The production SC5299BRP SKU includes:

Redundant (1+0) 650-W PFC power supply with dual-line cord support (full redundancy requires an
additional 650-W module, which you must purchase separately)

One non-redundant cooling fan

Support for six, tool-free non-hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.

Cables (one each):




Chassis intrusion switch assembly

The chassis is designed to work with the boxed Intel
sink.
10)
Common accessories include:
Hot Swap Drive Bays:
AXX6DRV3GEXP: Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free
–
SAS ports from the integrated SAS controller, ROMB Card, or SAS RAID card.
AXX4DRV3GEXP: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free
–
SAS ports from the integrated SAS controller, ROMB Card, or SAS RAID card. Only supported in the
®
Intel
AXX6DRV3G: 6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports. SAS
–
hard drive support requires SAS connectors from a SAS enabled board SKU or SAS RAID Card. Not
supported with S5000PSLROMB or the SRCSAS144E RAID card.
AXX4DRV3G: 4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports. SAS
–
hard drive support requires SAS connectors from a SAS enabled board SKU or SAS RAID Card. Only
supported in SC5400 chassis family and not supported with S5000PSLROMB or the SRCSAS144E
RAID card.
Front Panel Cable (USB header t chassis front panel)
USB Cable (USB header to chassis front panel)
AC power cord is included in SC5299DPNA
Front Panel Cable (USB header t chassis front panel)
USB Cable (USB header to chassis front panel)
AC power cord is included in SC5299BRPNA
Server Chassis SC5400 chassis family.
® ®
Xeon processor 5000 sequence using an active heat
® ®
Xeon processor 5000 sequence using an active
® ®
Xeon processor 5000 sequence using an active heat
14