Attaching Cables - HP D7171A - NetServer - LPr Installation Manual

4-Post Rack Installation (Continued)
Leveler
Screws (4)
NOTE ) The pins on both ends support the outer-rails in the rack
and the flat spring tab in front of the outer-rail secures it
in the rack. See Releasing Outer-Rails from Rack.
NOTE) ) The HP Netserver weighs 32 lbs (14.5 kg) fully loaded.
It may be helpful to use two people when placing the
Netserver into the rack.
Anti-tip Foot
Extended
Spring Tab
View Rotated
90 Degrees
Counter Clockwise
Releasing Outer-Rails
from Rack

Attaching Cables

Mouse
Power
Parallel
Keyboard Serial A/
USB (2)
MGMT
Obtaining Additional Documentation
For additional documentation, refer to your HP Netserver LP 1000r Online
Documentation CD-ROM. You can also access additional information
and documentation from HP's external web site, either by connecting
directly or through your Online Documentation CD-ROM.
LAN A/
MGMT LAN B
Video External
SCSI Connector