Completing The Installation - HP D7171A - NetServer - LPr Notice

NOTE If you do not select everything, be sure to select Apache Web
Server manually so it will start up at boot time.
When you are satisfied with your selections, tab to
"OK" and press <Enter>.
22. "Install Log" Make a note of the location of your log file, in case you need to refer to
or use it.
"OK" <Enter>
23. "Running"
Message shows progress on file system construction.
24. "Install Status"
During the next few minutes, the screen will show the
installation status of the Linux system, including any
packages you selected for installation.

Completing the Installation

25. "Probing Result (Configure Mouse)"
"OK" <Enter>
26. "Configure Mouse"
Use <space> to put an asterisk into the check box for
"Emulate 3 mouse buttons."
Tab to "OK" <Enter>
27. "PCI Probe"
OK <Enter>
28.. "Install Status" brief pause
29. "Monitor Setup"
NOTE This step assumes you have an HP monitor that supports 1280 X
1024 X 72 Hz.
---> HP 1280 X 1024—72 Hz
NOTE If your monitor is different, select "Custom" here. Also note
later in the process "Video Mode" may require different entries
for a different monitor.
Tab to "OK" <Enter>
8