HP D7171A - NetServer - LPr Notice page 7

<F3>
16. On the edit screen in front of the text string indicating the root file system, type
/
(in Linux, this / indicates the root directory)
Tab to "OK" <Enter>
Notice the "/" in front of the main Linux Native partition.
17. "Current disk Partitions"
Tab to "OK" <Enter>
18. "Active Swap Space"
Be sure /dev/sda2 is highlighted. If not, use either
the down arrow or tab key to highlight /dev/sda2.
Toggle the selection by pressing <space>, and check to
see that the asterisk appears indicating that /dev/sda2
has been selected.
NOTE Also select "check bad blocks during formatting." Doing so will
take more time now but may make your system more reliable.
Tab to OK <Enter>
19. "Scanning Packages" Pause while scan is completed. This may take a few moments.
20. "Partitions to Format"
Be sure /dev/sda1 is highlighted. If not, use either
the arrow or tab key to highlight /dev/sda1. Toggle the
selection by pressing <space>, and check to see that
the asterisk appears indicating that /dev/sda1 has been
selected.
NOTE Also select "check bad blocks during formatting." Doing so will
take more time now but may make your system more reliable.
Tab to OK <Enter>
21. "Components to Install"
Use arrow keys and <Space> to select the packages you
want installed on your system. If you want all 561
packages and have plenty of space, scroll all the way
to the bottom of the list and select "Everything"
7