Chapter 1
The user guide for your mass storage units, such as the HP Rack
Storage/8 System Installation Guide
Verifying Contents
The contents of the shipping box include:
New bezels for the NetServer, one for the Compaq rack configuration, and
one for the HP rack configuration
Bezel hinge plate and bezel hinge
Bezel latch plate and bezel latch
Control panel bezel (for HP or Compaq rack configuration)
Rack mounting rails (for HP or Compaq rack configuration)
Mounting screws and hardware
Prepare for Installation
Gather the tools and the setup information you need before beginning the
conversion. Locate the HP NetServer where there will be sufficient space to
remove the covers, power supply modules, and disk drives. If you plan on adding
accessory cards or additional memory, reserve bench space at a comfortable level
so you can reach the interior of the LH 3r easily.
4
Introduction