Removing Disk Drives - HP D7171A - NetServer - LPr Manual

Chapter 2
Figure 2-2. Removing the HP NetServer LH
Removing Hot-Swap Hard Disk Drives
Before you lift the NetServer, remove the hard disk drives. This will lighten the
NetServer so fewer people will be needed to lift it.
CAUTION
The HP NetServer LH 3r weighs up to 160 pounds (73 kg.)
when fully loaded. Take out power supplies and hot-swap
hard disk drives before lifting the NetServer into the rack.
Follow all local regulations when moving the NetServer. In
the USA, OSHA regulations require one lifter for every 40
pounds of weight or fraction thereof.
8
Removing LH 3 Covers and Components
Unscrew Rack
Rail Cover
3 Rack Rail Cover