Removing The Bezel - HP D7171A - NetServer - LPr Manual

Chapter 1

Removing the Bezel

1. Pull the top of the bezel forward until it unsnaps.
2. Lift the entire bezel upward and away from the chassis. See Figure 1-1.
The bezel connects to the front of the HP NetServer chassis with two snap-in
connectors at the top front of the chassis and two metal tabs, which fit into
two slots on the bottom front of the chassis.
Figure 1-1. Removing the HP NetServer LC 2000 Bezel
CAUTION To prevent damage to the covers, support the cover as you
remove it from the HP NetServer. The NetServer's covers can
be easily damaged.
Preparing the HP NetServer for Rack-Mounting
3