Removing The Bezel Cover; Removing The Pedestal Top Piece - HP Integrity rx2800 i2 Installation Manual

Hide thumbs Also See for Integrity rx2800 i2:

Table of Contents

Figure 4-4 Removing the bezel cover

Remove the pedestal top piece.

With the server still in the vertical position, look at the left side of the server (server

bottom) to locate the lock release tab.

Press the lock release tab on the pedestal top piece away from the chassis to unlock the

pedestal top piece from the server. See

lock release locations.

Figure 4-5 Removing the pedestal top piece

Slide the pedestal top piece toward the back of the server to release it from the server.

Once the pedestal component has moved about 1/4 inch, the lock releases, and you can

release the tab.

Pull the pedestal kit top piece away from the server.

Repeat these steps for the bottom piece.

Figure 4-5

for the pedestal top and bottom piece

Removing the pedestal kit

Table of Contents

Proliant dl380