Rack Mounting The Hp Netserver; Introduction - HP D7171A - NetServer - LPr Manual

2 Rack Mounting the HP NetServer

Introduction

This chapter explains how to mount the HP NetServer in an HP System/E
or System/U rack. The illustration below shows the characteristics of the
System/E and System/U racks. If you have the older HP Systems rack, see the
HP NetServer LC 2000 Installation Guide for instructions. (If you are mounting
the NetServer in a non-HP rack, refer to the separate rack-mounting guide for
third-party racks. It is packed in the accessories tray in the HP NetServer's
shipping box.)
Figure 2-1. HP System/E and System/U Rack Features
a
b
Characteristics of
c
System/E and
System/U Racks:
a. 5-Cornered Columns
d
b. Full Panel Vent
c. "HP Rack System/E" or
"HP Rack System/U"
Name Plate
d. Numbered EIA Units
e. Anti-Tip Foot Extends
Out Front or Back
e
7