HP D7171A - NetServer - LPr Software Install Manual page 7

4) Select "IBM OS/2"
5) Select "Warp Family"
6) Select "Continue"
7) Select "Show Configured Card"
8) Select "View Resources" It shows a table with the following column headings:
SLOT IRQ DMA MEMORY I/O PORTS
9) Select "Save to Disk" note that there is no printer support for the Navigator
10) Select "Continue"
11) Select "Continue"
12) Select "Exit"
13) Print the information saved to diskette in step 9 if you want a hard copy
Tip 10) How to Run the HPVGSET.EXE Utility from the Navigator CD-ROM
To run the HPVGSET.EXE utility from diskette you must create a driver diskette from the
Navigator diskette library section. Boot PC to DOS and type:
hpvgset.exe
1) Boot Navigator CD-ROM
2) Select "Configuration Assistant"
3) Select "Custom Configuration"
4) Select "IBM OS/2"
5) Select "Warp Family"
6) Select "Continue"
7) Select "Execute Card Utilities"
8) Select "Exit" when done.
Tip 11) 4GB RAM support in OS/2
Warp Server SMP 4.0 is the only version of IBM OS/2 that supports 4GB of RAM.
Warp Server 4.0 works fine with a max of 1GB. We experienced system hangs at the Warp red
logo when booting a NetServer LX with 4GB RAM running Warp Server 4.0
7