Download Print this page

HP D7171A - NetServer - LPr Software Install Manual page 26

Ibm os/2 installation guide
Hide thumbs Also See for D7171A - NetServer - LPr:

Advertisement

If you experience any problems doing the generic installation process then try using the
custom installation process.
Procedure #1: Install IBM OS/2 product using standard IBM installation process and then
apply Hewlett-Packard specific drivers.
Phase 1: Create Copy of IBM diskettes
1. Make copies of IBM diskettes. Label the copies "Work Install Diskette", "Work Diskette 1",
and for Warp 4.0 you will have a "Work Diskette 2".
Phase 2: OS/2 Start OS/2 Installation
2. Install the product using IBM standard installation procedure. Start installation of OS/2 using
copy of IBM "Installation" Diskette
To begin installing OS/2 Warp 4,0 or OS/2 Warp Server 4.0 place the Installation Diskette in
drive A, insert the IBM OS/2 CD-ROM and boot the system.
3. Insert "Work Diskette 1" when prompted for IBM Diskette 1. (Warp 4.0 will also ask for
Diskette 2)
When you are prompted to insert Diskette 1 and press Enter, insert the copy of "Work
Diskette 1" created with the Drivers/Utility diskette, then press Enter. An OS/2 logo appears,
and after some time you will see a screen titled "Welcome to OS/2". Press Enter again to
continue.
Select "Advanced Installation" if you want to partition your drives. Follow the prompts to
create partitions as needed.
Select "Accept the drive".
NOTE: If you change the partition information, you will be prompted to
reboot. In this case, repeat steps 2 and 3.
Highlight "Format Partition" when you have chosen an installation partition. Format the
partition with the file system of your choice (FAT or HPFS). The system will take about 20
minutes copying files.
Phase 3: First Reboot
4. Remove the diskette as requested and Press Enter to reboot the system at the first reboot
screen.
5. Complete the OS/2 Configuration screen. It is important that you select VGA for the display
configuration. You can change this after the installation is complete. Select Next to continue.
( If you have a NetServer E40 or Lpr,at the System configuration panel select "CD-ROM
26

Advertisement

loading