Removing Covers And The Cpu Baseboard; Removing The Bezel And Covers - HP D7171A - NetServer - LPr Upgrade Manual

2 Removing Covers and the CPU
Baseboard
CAUTION
Wear a wrist strap and use a static-dissipating work surface
connected to the chassis at all times.
Before you can install the new LH 4 CPU baseboard, there are several components
to remove from the LH 3:
Remove the bezel and covers 2 and 3 to get access to the HP NetServer's
interior
Remove the LH 3 CPU baseboard
Remove the old CPU baseboard guide and the air baffle from the LH 3
chassis.

Removing the Bezel and Covers

The HP NetServer has three hand-removable cover panels and a bezel:
Cover 1 covers the side where the I/O board is located.
Cover 2 covers the area above the CPU baseboard.
Cover 3 covers the side where the CPU baseboard is located.
11