Troubleshooting Resources - HP D7171A - NetServer - LPr Installation Manual

Chapter 3
ECC Multiple-bit errors (two bits or more). Multiple-bit errors, which
are extremely rare, may cause the system to halt or display a memory
parity error. If this occurs, take the following steps:
1. Cycle the system power.
2. During the power-on self test (POST), press the 'D' key to test
memory.
If the memory test passes, then the memory failure could be a soft
ECC error.
Reboot the system and reactivate your applications.
If the memory test fails, please contact your support representative for
additional assistance to isolate the problem.

Troubleshooting Resources

If you are having problems installing your 4 GB Memory board, a number of
different tools help to troubleshoot the problem:
HP NetServer LXr Pro8 User Guide
HP NetServer Navigator CD-ROM
HP NetServer Information Assistant
List of Error Messages and Beep Error Messages
Problem solving processes
NetServer Utilities
Troubleshooting
27