HP D7171A - NetServer - LPr Installation Manual page 10

Chapter 2
The memory board DIMM slots are numbered from M0 to M31 as shown
in Figure 2-1.
The recommended memory configurations and the slot numbers where
SDRAM DIMMs are installed are listed in Figure 2-2 and Figure 2-3.
Add SDRAM DIMMs only in these quantities and in the specified slot
numbers.
Figure 2-1 shows the DIMM slot numbers on the 4 GB Memory Board. Board
jumpers are preset to the memory board revision level.
M0 M4
6
Installing Memory in the 4 GB Memory Board
M8 M12 M16
Figure 2-1. DIMM Slot Numbers
M20 M24 M28