Accessing The Lower Board Cage - HP D7171A - NetServer - LPr Installation Manual

Chapter 2
Power Interlock
Switch Unlocked
Figure 2-5. Power Interlock Switch, NetServer Rear Panel

Accessing the Lower Board Cage

The lower board cage holds the NetServer's memory boards. To reach these
boards, you extend the satellite chassis and remove the lower fan module and rear
access panel.
NOTE If the server is mounted in a rack, cables most likely run from
the satellite chassis to other rack components. If these cables
prevent easy access to the satellite, or could stop the satellite
from sliding out completely, disconnect them.
To access the lower board cage:
1. Remove the retention bracket from the lower rear of the NetServer and set
it aside. See Figure 2-6.
10
Installing Memory in the 4 GB Memory Board