Copy Size; Startup Menu; Auto Compare; Copy With Size - Addonics Technologies HDUSI325 User Manual

Copy Size

This option is used to specify the size of the source hard disk for simplifying further copying
operations.
Press ENT and the LCD will display a detailed list of options a s shown below
Use the Up and Down arrow keys to choose di erent copy si zes. The system will o er their
corresponding percentages so the user can specify the amount to copy from the source hard disk.
Press ENT to con rm and save the changes.

Startup Menu

This option allows you to set an option other than "Se tup" to be displayed as the rst available
option on the menu every time you start the system.
Press ENT then use the Up and Down arrow keys to choose other opt ions. By default the rst
menu option is Copy HDD.

Auto Compare

This option automatically compares the source hard disk wit h the target hard disk after a copy
operation is completed.
Press ENT to access option. By default it is set to O . Use th e Up and Down arrow keys to choose
On.

Copy With Size

This option is used to set the source hard disk with th e target hard disk the same capacity after a
copy operation.
Press ENT to enter the following gure. The default is O . Use the Up and Down arrow keys to
choose On.
www.addonics.com
8-02. Setup
Copy Size
Copy Size
100%~1% (*MB)
8-03. Setup
Startup Menu
Startup Menu
1. Copy HDD
8-04. Setup
Auto Compare
Auto Compare
O
8-05. Setup
Copy With Size
Copy with Size
O
Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/