Rcu Operations List When "Mcu&Rcu" Selected; When Ldkc, A Cu Group, Or Cu Is Selected In Tree - HP StorageWorks P9000 User Manual

RCU Operations list when "MCU&RCU" selected
List field descriptions when MCU&RCU is selected in the Display box are shown below. The fields
vary according to the selections you make in the tree:
"When LDKC, a CU group, or CU is selected in tree" (page 144)
"When an MCU or RCU is selected in tree" (page 145)

When LDKC, a CU group, or CU is selected in tree

The following columns are displayed in the list area when MCU&RCU is selected in Display, and
an LDKC, CU group, or CU is selected in the tree.
Column
CU
Type
S/N
SSID
Paired CU
M-R Path
Status
Num. of Path
144 Continuous Access Synchronous Z GUI reference
Description
CU number selected on the tree.
Displays whether the paired system is an MCU or RCU. This depends on whether the system
and CU you accessed in Remote Web Console is a main or remote system. For example, if
you accessed a main system (MCU), then Type will show RCU, a remote system, and vice
versa.
Serial number of the paired CU (five digits). The LDKC number (two digits) displays next to
the S/N.
The SSID is displayed in a four-digit hexadecimal number.
CU number of the paired CU.
Path channel type (fibre) between the CU in the local system and paired CU. This column is
blank when the local CU is an MCU.
Normal indicates no path failure to the RCU.
Failed indicates a failure in all paths to the RCUs.
Warning indicates that a failed path to the RCU exists.
The field is empty when the local CU is an MCU.
Number of paths (blank when the connected CU is an MCU).