HP StorageWorks P9000 User Manual page 55
Continuous access synchronous for mainframe systems user guide
Hide thumbs
Also See for StorageWorks P9000:
- Reference manual (399 pages) ,
- Manual (333 pages) ,
- User manual (322 pages)
Table of Contents
Advertisement
6.
In the PPRC support by host box, select the status of PPRC support for the host.
7.
In the SCP Time(sec.) box, select the State change pending (SCP) time.
8.
In the Maximum Initial Copy Activities box, enter the number of volumes that can be copied
concurrently during an initial copy operation. The number can range from 1 to 16 volumes
at the CU level.
9.
Click Set.
10. You can change the value after clicking Set by right-clicking it in the Preview list and selecting
Modify. In the dialog that appears, make any corrections and click Set.
To cancel the setting, right-click it in the Preview list and select Delete.
1 1. When satisfied, click Apply. This completes and saves the configuration.
Set number of volumes to be copied concurrently, path watch time
55
Advertisement
Table of Contents
