HP StorageWorks P9000 User Manual page 99

NOTE: The information shown in
HP account team for the latest GDPS Continuous Access Synchronous Z Compatible XRC matrix
information.
Table 39 GDPS Continuous Access Synchronous Z Compatible XRC matrix
Feature
GDPS
Planned outage
Unplanned outage using
IEA494I
IEA494I Long Busy message
Table 40 GDPS Continuous Access Synchronous Z Compatible XRC matrix
Feature
Peer-to-Peer Remote Copy
Hardware based
Interface between storage
systems
Copy modes supported
Dual Copy combination
support
TSO command Support
ICKDSF command support
P/DAS support
Table 39 (page 99)
IBM 3990 6E
Supported
Supported
Default time of 120 sec for
FREEZE after IEA494I
message is issued.
IBM 3990 6E
PPRC
3990-6 to 3990-6
ESCON – max of 43 km
communication using
channel extenders
Synchronous
Supported
Supported
Supported
Supported
may not be current. Please contact your
P9500
Supported
Supported
Default time for FREEZE is
120 sec, optional user
defined from 0 to 600 sec
after IEA494I message is
issued.
P9500
Continuous Access
Synchronous Z
P9500, XP24000/XP20000
Disk Array, and XP12000
Disk Array/XP10000 Disk
Array to P9500,
XP24000/XP20000 Disk
Array and XP12000 Disk
Array/XP10000 Disk Array.
Communication using switch
and extender using Fibre
Channel and Fibre Channel
cable
Synchronous
Not Supported. Dual Copy
is not supported by storage
system.
Supported. Some additional
options only available using
Remote Web Console/SVP.
Supported. Some additional
options only available using
Remote Web Console/SVP.
Supported
P9500 response characteristics to failure conditions
XP24000/XP20000 Disk
Array,
XP12000 Disk
Array/XP10000 Disk Array
Supported
Supported
Default time for FREEZE is
120 sec, optional user
defined from 0 to 600 sec
after IEA494I message is
issued.
XP24000/XP20000 Disk
Array,
XP12000 Disk
Array/XP10000 Disk Array
Cnt Ac-S Z
XP24000/XP20000 Disk
Array and XP12000 Disk
Array/XP10000 Disk Array
to XP24000/XP20000 Disk
Array and XP12000 Disk
Array/XP10000 Disk Array.
Communication using switch
and extender using Fibre
Channel and Fibre Channel
cable
Synchronous, asynchronous
The default for IBM software
commands is synchronous.
Not Supported. Dual Copy
is not supported by storage
system.
Supported. Some additional
options only available using
Remote Web Console/SVP.
Supported. Some additional
options only available using
Remote Web Console/SVP.
Supported
99