Creating Fxoto Volumes Using The Fmt Utility - HP StorageWorks P9000 User Manual

NOTE:
This command does not set the License key to falmt.dll. Use the ppkeyset command to set
it.
Example:
# autoppkeyset /temp/12345.plk
PPID=xxx
ppkeyset 12345678901234567890 /usr/bin/fcu
[/usr/bin/fcu] set in available for all days.
---------------------
PPID=xxx
ppkeyset 12345678901234567890 /usr/bin/fcunw
[/usr/bin/fcu] set in available for all days.
---------------------
PPID=xxx
ppkeyset 12345678901234567890 /usr/lib/libfal.xx
[/usr/bin/fcu] set in available for all days.
---------------------
#
Error messages for the autoppkeyset command:
Error message
autoppkeyset [PPID FILE]
Too many arguments.
[PPID FILE] does not exist.
[PPID FILE] was not opened.
Defined line in [PPID FILE] is too long.
ppkeyset failed.
ppkeyset64 failed.

Creating FXoto Volumes Using the FMT Utility

After the Data Exchange software has been installed on the open-system hosts, you can format the
FXoto volumes using the FMT utility. This enables you to allocate FXoto intermediate datasets. The
FMT utility for UNIX is a UNIX command executed from the UNIX command line. The FMT utility for
Windows is a GUI.
NOTE:
FCU version 01-01-42 or later is required for the FMT utility.
66 Preparing for Data Exchange Operations
Specify the PPID FILE.
The command specified too arguments.
Install the PPID FILE in the server and execute the command.
Re-execute the command.
Check the PPID FILE format. The line is too long. The line must be
under 256 bytes.
Re-execute the command.
Re-execute the command.
Meaning