Environment Variable For Interval Time; Display Window For Interval Function; Display Window For The Interval Function; Relationship Between Fcu_Otm_Interval And Interval Time - HP StorageWorks P9000 User Manual

Environment Variable for Interval Time

You can specify an interval time after the OtM transfer completes by setting environment variable
(FCU_OTM_INTERVAL).
(FCU_OTM_INTERVAL) and interval time.
Table 26 Relationship between FCU_OTM_INTERVAL and Interval Time
FCU_OTM_INTERVAL
No definition
Value between 60 and 600
(seconds)
Other value

Display Window for Interval Function

The interval function for OtM transfer completion displays interval processing.
shows an example of its display window.
# fcunw -nc -P otm a.dat VSN:DSN EA No LF
otm a.dat VSN:DSN EA No LF Emp=No RDW=No VSE=No PIPE=No
Now checking ...
Start
Processing ( 40%)
Processing ( 80%)
OTM Interval ...
Complete
#
Figure 22 Display Window for the Interval Function
.
48 About Data Exchange Operations
Table 26 on page 48 shows the relationship between the environment variable
The interval function is not available. OtM transfer completes immediately.
OtM transfer completes after a specified interval time passes.
The interval function is not available. OtM transfer completes immediately.
Interval time
Figure 22 on page 48