HP StorageWorks P9000 User Manual page 168

Error Error Message and Description
Code
External table file: Close error
-223 The code conversion table could not be
closed.
Parameter: Direction, PAD, and DEL not matched
-240 The combination of otm direction,
PAD=Yes, and DEL=No is not allowed.
Parameter: Direction and RDW not matched
-241 The combination of otm data transfer
direction and RDW=Yes is not allowed.
Parameter: Code conv. and RDW not matched
The combination of RDW=Yes and a
-242
code conversion other than No is not
allowed.
Parameter: Padding and RDW not matched
-243 The combination of RDW=Yes and
padding=Yes is not allowed.
Parameter: Delimiter and RDW not matched
-244 The combination of RDW=Yes and
delimiter=Yes is not allowed.
Parameter : Specified VOLSER isn't defined
Volume Definition file.
-245
Specified VOLSER is not defined in the
volume definition file.
Parameter definition file : Length error
-300 The record length in the parameter
definition file is too long.
Mainframe file name : Length error
An input dataset name (in the case of
-301 FXmto) or an output dataset name (in
the case of FXotm) in the parameter
definition file is too long.
168 Troubleshooting
Recommended Actions
Check the system error.
For FXotm with the padding function, make sure
that the delimiter option is specified as Yes (or
set padding=No).
When the Data Exchange data transfer direction
is otm, make sure that the RDW option is spe-
cified as No.
When the code conversion option is EA or
File_name, make sure that the RDW option is
specified as No. When RDW=Yes, the code
conversion option must be specified as No.
When the padding option is specified as Yes,
make sure that the RDW option is specified as
No.
When the RDW option is specified as Yes, make
sure that the padding option is specified as No.
When the delimiter option is specified as Yes,
make sure that the RDW option is specified as
No.
When the RDW option is specified as Yes, make
sure that the delimiter option is specified as No.
Check whether specified VOLSER is defined in
the volume definition file.
Specify a record length that is less than 3,200
characters (do not include the delimiter).
Specify an input/output dataset name that is
less than 1,025 characters.