HP StorageWorks P9000 User Manual page 159

Error Error Message and Description
Code
UNIX file: Not a directory
-181 The specified name is not a directory
name.
UNIX/Open system file: Open directory error
-182*
A directory open error occurred.
UNIX/Open system file: Close directory error
-183
A directory close error occurred.
Input file name: No data
-190
The input file name is not specified.
Output file name: No data
-191
The output file name is not specified.
Parameter file name: No data
-192 The parameter definition file name is not
specified.
Parameter file: End line
-200 The last parameter set was loaded from
the parameter definition file.
Parameter file: Direction error
-201 The data transfer direction specified in
the parameter file is incorrect.
Parameter file: Too many data
-202 The number of parameter sets for
parameter definition file exceeded 100.
Parameter: Empty select error
-203
The Emp parameter is incorrect.
Parameter: RDW select error
-204
The RDW parameter is incorrect.
RDW error: CODE_CONV not supported
-205 Code conversion is not specified as No
when RDW=Yes.
Check the specified directory name.
Display the system error code using the Help-
Error command. See the OS user manual for
information on system errors.
Display the system error code using the Help-
Error command. See the OS user manual for
information on system errors.
The input file name must be specified when you
select File-Save.
The output file name must be specified when
you select File-Save.
The FCU parameter definition file name must be
specified when you select File-Save.
The next time you select File-Load, the first set
of parameters will be loaded.
Make sure that the direction (mto or otm) is
correct.
The FCU parameter definition file can only store
a maximum of 100 parameter sets. If necessary,
delete one or more parameter sets to make room
for a new parameter set.
Make sure that the Emp=Yes/No parameter is
correct.
Make sure that the RDW=Yes/No parameter is
correct.
Code conversion cannot be performed when
RDW=Yes. Change the code conversion para-
meter to No.
HP StorageWorks P9000 Data Exchange User Guide
Recommended Actions
159