Key installation steps
Step 1
Step 3
Step 4
and
nl
Step 5
Step 6
Step 7
Step 8
Step 10
40
Installation best practices and procedures
Set up the rack.
Install mezzanine cards on the server blades.
Install BladeSystem c-Class enclosure and its servers, interconnect devices, and other
components. Install operating system updates and patches, and, if necessary, update firmware
on the HP mezzanines and interconnect devices.
For each server that will boot locally (not use the storage enclosure as a boot device), install
the operating system.
Install P2000 G3 SAS MSA Array controller and drive enclosures. If necessary, update the
firmware.
Configure zoning on the switch.
Configure the P2000 G3 SAS MSA Array controllers and storage.