Hp Bladesystem C-Class Server Blades; Proliant Server Blades; For More Information - HP P2000 Deployment Manual

HP BladeSystem c-Class Server Blades

An HP c-Class server blade is a full-function server that slides into an HP BladeSystem c-Class
enclosure, in contrast to a server that is mounted in a rack. One great advantage of blade
architecture is the easy addition of more server blades to your environment.
HP BladeSystem c-Class enclosures support server blade models that are built in standardized form
factors, referred to as half-height (4U) or full-height (8U).

ProLiant Server Blades

HP ProLiant c-Class server blades share the same features and design standards of traditional
rack-mounted ProLiant servers. A variety of server blade models is available, each with different
features, such as using different processors, number of processors included, memory types, and
maximum amount of supported memory.
To learn more about available server blade models and their features, see the HP BladeSystem
c-Class ProLiant Server Blades website:
components/c-class-bladeservers.html.
Example half-height server blade

For more information

Device website:
c-class-bladeservers.html
BladeSystem Technical Resources website:
Be sure to read the following documents, shipped with the server blade and BladeSystem enclosure:
HP ProLiant Server Blade Installation Instructions—Includes physical installation instructions.
HP BladeSystem c-Class Solution Overview Setup Poster—Provides an overview of the complete
installation process of an HP BladeSystem c-Class solution.
Example full-height server blade
http://h18004.www1.hp.com/products/blades/components/
http://h18004.www1.hp.com/products/blades/
http://www.hp.com/go/bladesystem/documentation
HP BladeSystem c-Class Server Blades
Example full-height, double-wide server
blade
13