HP P2000 Deployment Manual page 22

is installed in the BladeSystem c-Class enclosure, the storage volumes will be immediately
visible to that server.
◦ For information about mapping volumes using the SMU, see "Managing Host Access to
Volumes" in the HP P2000 G3 MSA System SMU Reference Guide.
For information about mapping volumes using the CLI, see the "Map volume" section in
◦
the HP P2000 G3 MSA System CLI Reference Guide.
When mapping, be sure to choose all P2000 G3 SAS MSA controller ports (A1, A2, A3,
A4, B1, B2, B3, and B4), to guarantee access in the event of a controller, port, or cable
failure. During a failover, if access is granted to all P2000 G3 SAS MSA controller ports, I/O
will fail over to ports on the surviving controller.
22 Device information