Vertical white streaking or faint areas on page.
Problem:
Toner cartridge is not installed properly.
How to Replace the Toner Cartridge
Solution:
Problem:
Toner is low and does not distribute properly.
Solution:
Remove the toner cartridge and gently shake it side to side over a trash
receptacle. If this doesn't help, replace the toner cartridge. See
Replace the Toner Cartridge
Be careful not to get toner powder on your hands or clothes: use only cold water
to remove any spills – hot water will "fuse" the toner making it much harder to
remove.
Problem:
The printer darkness is improperly set.
Solution:
Adjust the Printer Darkness setting:
1. Open the Status Monitor.
2. Click the Printer Setup tab
3. Click the Printer Menu button
4. Click on the Darkness scrolling menu and adjust the setting.
Problem:
Image drum is worn out.
Solution:
Check the drum and replace it if necessary. See
Drum Cartridge
Problem:
LED array is dirty.
Solution:
Clean the LED array. See
.
.
Cleaning the LED Array
OKIPAGE 6w
How to
How to Replace the Image
61