Print is fuzzy.
Problem:
The printer cover is not closed properly.
Solution:
Close the cover firmly.
Problem:
The LED array is dirty.
Solution:
Clean LED array. See
Problem:
Poor connection between the printer and the image drum cartridge.
Solution:
Clean and check the contacts inside the printer, on the left. See
Image Drum Contacts
Problem:
The printer darkness is improperly set.
Solution:
Adjust the Printer Darkness setting:
2. Open the Status Monitor.
3. Click the Printer Setup tab
4. Click the Printer Menu button
5. Click on the Darkness scrolling menu and adjust the setting.
Problem:
Incomplete toner fusing caused by using paper exposed to high humidity.
Solutions:
- Change paper stocks.
- Check paper storage environment or use a dehumidifier. See
Cleaning the LED Array
OKIPAGE 6w
Cleaning the
Storing Paper
65