Pitney Bowes DocuMatch Integrated Mail System Application Notes page 98

DocuMatch Application Notes
Setting Paper Tray Options on DocuMatch Systems with Lexmark
Printers, continued
92
Look near the beginning of the second page to verify the
paper type selections.
If the DocuMatch control panel displays an error message
when you try to run the document printer test as explained
above, it means that the system is trying to print from a
tray that is not defined as a plain paper tray. To correct this:
1. Restart the DocuMatch.
2. On the DocuMatch control panel, press System Op-
tions/System Setup/Report Setup.
3. Set the reports to feed from a tray that you defined as a
plain paper tray.
Note that the printer cannot tell what type of paper is
actually loaded in its trays. If you put plain paper in a
letterhead tray, for example, the system will not display an
error message. The names of the paper types are really for
your reference and to tell the printer which trays to group
or chain together. You may find it helpful to mark the trays
with the names of the selections you have made.
DocuMatch Integrated Mail System
TM