Pitney Bowes DocuMatch Integrated Mail System Application Notes page 88

DocuMatch Application Notes
Using Rumba to Print to the DocuMatch from an AS/400 System
82
on Properties to display the driver setup screen.
Here you can configure the DocuMatch job as you
normally would.
7. Send a sample print job to the queue you selected
in step 2 and use File/Print Preview to view the
results of your selections. If you want, you can save
the changes to the settings in your profile so that
the system will remember them.
8. When you are ready to print, send your AS/400 job
to the queue you selected in step 2. The job should
now print on the DocuMatch, or if you set the
DocuMatch to print to a file, you will be prompted
for a file name. You can save the print files to a
floppy disk on the PC. To run them later, insert the
floppy in a PC with a DocuMatch system and enter
the DOS command
copy /b a:filename LPT1:
where filename is the is the name of the print file
you created.
DocuMatch Integrated Mail System
TM