Selecting The Documatch Driver From Microsoft Word 6 - Pitney Bowes DocuMatch Integrated Mail System Application Notes

Selecting the DocuMatch Driver from Microsoft Word 6

DocuMatch Integrated Mail System
TM
Follow this procedure:
Step Action
1. Choose File/Print and look at the printer listed at
the top of the dialog box.
2. If it is not "Pitney Bowes DocuMatch on LPT1:"
(or whatever printer port you are using), click
Printer to bring up the Print Setup dialog. Click on
the "Pitney Bowes DocuMatch on ..." line, then
click Set as Default Printer. This selects the
DocuMatch driver. If the device (LPT1:, etc.)
named in the DocuMatch Peripheral line does not
match the port your DocuMatch is connected to,
you need to go into the Windows Control Panel
and correct it.
3. Click Options to bring up the Driver Setup screen.
This is where you set up the DocuMatch system
for you job requirements. When the Setup screen
first displays, it shows the most recent settings
used (or a default set if this is the first time you
have used the driver). For information on chang-
ing the settings, refer to the DocuMatch Software
User's Guide, or Selecting DocuMatch Driver
Options on page 33 of these application notes.
DocuMatch Application Notes
29