COMMAND
Destination
Start
Destination End
ZipBreak
Stacker=
DocuMatch
Integrated Mail System
TM
Table of Control Page Commands
DATA VALUES
1 or more text
lines below
command
-
1: First piece of a
new group
0: Not first piece
U: Send to upper
stacker
L: Send to lower
stacker
DocuMatch Application Notes
FUNCTION
Prints text as
destination
address on the
envelope
Marks end of
destination
address
Used to mark a
tray or package
break for pre-
sorted mail.
First piece is off-
set in stacker.
Also, if pieces
need to be re-
generated after
a jam, system
ensures all pieces
are stacked on the
correct side of the
break.
Controls selective Lower stacker
stacking on
Model H550.
First check
selective stack-
ing on the
finshing tab.
ACTION IF MISSING
Uses address
from document
Error if there
has been a
destination start
No break
61