Operation With Bluetooth Or Wireless Lan Options; Printing - Oki LP470s Manual Rapide

Operation with Bluetooth or Wireless LAN
Options

10. Operation with Bluetooth or Wireless LAN Options

To print using a Bluetooth interface or a wireless LAN interface, perform the
To print using a Bluetooth interface or a wireless LAN interface, perform the
following operations .
following operations.
R emove the USB/DIP switch cover,
➊
1
Remove the USB/DIP switch
and set the DIP switch (DSW) to
cover, and set the DIP switch
DSW-1, 2, 3, 4 = (OFF, ON, OFF,
(DSW) to DSW-1, 2, 3, 4 = (OFF,
OFF).
ON, OFF, OFF).
■ When the next label is not printed
1
With the printer online, press the
PRINT button to take the printer
offline (STATUS LED turns off).
2
Press the FEED button to feed
the labels.
* Note that the effective distance varies with the usage environment,
computer, or handheld terminal in use.
* Note that the effective distance varies with the usage environment,
computer, or handheld terminal in use.

Printing

3
When the paper stops, pull it in
D ata is sent from a PC.
➊
the direction of the arrow to cut
When printing is complete, hold the
➋
the label.
right or left corner of the label, pull
4
Press the PRINT button to put
it in the direction of the arrow, and
the printer online (STATUS LED
tear the label .
lights green).
* The number of labels that can be printed with one battery pack differs between
continuous printing mode and dispense mode printing .
* When the non-separated labels are severed somewhere other than the perforated
line, and the next label is not printed, perform the operations on the following page .
10
ON
11
23