slide the dispenser unit to the
The label installation method differs by printing mode.
continuous printing mode position. (See
Cuidado diario
P. 21)
Continuous printing mode
(See figure on P. 40)
Siga el procedimiento siguiente después de apagar la impresora y sacar la
batería .
2
Wipe off any smudges with a
cloth dipped in alcohol.
Cuidado del cabezal térmico
n
* Do not use thinner, benzene, or
1
kerosene.
Slide the cover release lever in
D eslice la palanca de liberación de
➊
the arrow direction to open the
la tapa para abrirla .
cover.
Si está en modo dispensador, primero
deslice la unidad dispensadora a la
First, slide the dispenser unit to the
posición de modo continuo (Ver página 16).
continuous printing mode position.
(See P. 21)
Limpie las manchas con un paño
➋
2
While pressing the label guide
humedecido en alcohol .
stopper, slide the label guide to
* Nunca utilice diluyentes de pintura,
the label size to be used.
benceno o kerosén .
3
Load the paper in the printer.
Make sure the roll is oriented correctly.
34
Label paper
Journal paper
Rodillo del dispensador
Label guide stopper
4
17
93