III-8.
Configuration Tool
Backup Settings
Restore Settings Click the browse button to locate a
Restore to
Factory Defaults
Note: Restoring settings to the factory
default will restore all settings,
configurations and passwords back to the
factory default.
Note: You can also reset the device to the
factory default by pressing and holding the
The access point's configuration tool enables you to back
up the current settings, restore the settings to a
previously backed up version or reset the access point
back to its original factory settings.
Click "Save" to save the current settings on
your computer as a .bin file. The default
filename is config.bin.
previously saved configuration file and then
click "Upload" to upload the file and replace
your current settings.
Click "Reset" to restore settings to the
factory default. A pop-up window will
appear and ask you to confirm and enter
your log in details. Enter your username and
password and click "Ok". See below for
more information.
63