Edimax EW-7228APn User Manual page 41

Channel
Number
MAC address
1-4
Set Security
Click "APPLY" to save changes. The following message will appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
III-2-5. AP Bridge-WDS
In this mode, this access point will connect to up to four other wireless access
2.4GHz (G), only access points using the
wireless band you select (802.11b, 802.11n,
or 802.11g) will be able to connect to this
device.
If you select 2.4GHz (B+G), then only access
points using the 802.11b and 802.11g bands
will be able to connect to this device.
If you want to allow 802.11b, 802.11g, and
802.11n access points to connect to this
device, select 2.4GHz (B+G+N).
Please select a channel number you wish to
use. The channel number must be same as
the other wireless access points you wish to
connect to.
Please input the MAC addresses of the
wireless access points you wish to connect
to.
Click this button to select an encryption
mode for this wireless link. A popup window
with security options will appear.
41