Edimax EW-7228APn User Manual page 40

Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
III-2-4. AP Bridge-Point to Multi-Point Mode
In this mode, this access point will connect to up to four other wireless access
points also using the same mode, and all connected Ethernet clients of all
access points will be connected together. This allows several physically isolated
networks to communicate with each other.
Band
Note: When you set the device to this
mode, it will not accept regular wireless
clients any more.
Please select the wireless band you wish to
use. By selecting different band settings,
you'll be able to allow or deny access points
using certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
40