Edimax EW-7228APn User Manual page 35

When you select AP Mode, the following appears:
Band
MAIN ESSID
Channel
Number
Associated
Please select the wireless band you wish to
use. By selecting different band settings,
you'll be able to allow or deny wireless
clients using certain bands.
If you select 2.4GHz (B), 2.4GHz (N), or
2.4GHz (G), only wireless clients using the
wireless band you select (802.11b, 802.11n,
or 802.11g) will be able to connect to this
access point.
If you select 2.4GHz (B+G), then only
wireless clients using the 802.11b and
802.11g bands will be able to connect to
this access point.
If you want to allow 802.11b, 802.11g, and
802.11n clients to connect to this access
point, select 2.4GHz (B+G+N).
Please input the ESSID (the name used to
identify this wireless access point) here. You
can input up to 32 alphanumerical
characters. Please note that the ESSID is
case sensitive.
Please select a channel number you wish to
use. If you know a certain channel number
is being used by other wireless access points
nearby, please refrain from using the same
channel number
Click the "Show Active Clients" button and a
35