Iii-9. Upgrade - Edimax EW-7228APn User Manual

III-9. Upgrade
Click on the browse button to open a window and locate the downloaded
firmware file. Confirm your selection and click "APPLY". A firmware upgrade
may take several minutes. The following message will appear:
Reset/WPS button for 10 seconds, until the
Power LED ( ) goes out. The Reset/WPS
button is located on the front panel of the
device.
The access point's upgrade feature allows you to update
the system firmware to a more recent version. You can
download the latest firmware from the Edimax website.
Selecting "Upgrade" from the menu on the left side will
bring you to the following screen.
Note: Do not turn off or disconnect the access
point during a firmware upgrade, as this could
damage the device.
Note: It is recommended that you use a wired
Ethernet connection to upload the firmware
file.
64