Edimax EW-7203APg Specifications

Access Point (5
Access Point (5
Wireless Access Point
Wireless Access Point
IEEE 802.11g/b AP
- in - 1)
- in - 1)
IEEE 802.11 g/b Wireless LAN Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE
802.11g/b wireless LAN, this wireless LAN access point can let your
wireless LAN client stations access both the wired and the wireless
network nodes.
WDS Bridge Mode (Repeater Mode)
The WDS (Wireless Distributed System) function let this access point
acts as an wireless LAN access point and repeater at the same time.
Users can use this feature to build up a large wireless network in a
large space like airports, hotels and schools ...etc. This feature is also
useful when users want to bridge networks between buildings where it
is impossible to deploy network cable connections between these
buildings.
Robust Wireless LAN Security (WPA support)
Except for the basic security control by using ESSID and 64/128 bit key
length WEP encryption, this access point also supports the advanced
security features, like MAC access control, TKIP and hide ESSID. It
provides a total solution for you to build up a secure wireless LAN
network environment that can prevent from all kinds of hacker intrusion.
RP-SMA Detachable antenna
This access point provides a standard RP-SMA antenna connector that
can let you apply all kinds of high gain antennas. This can help you to
enlarge your wireless LAN coverage.
Web Configuration
You can configure this access point through the friendly Web user
interface with a browser.
EW-7203APg