Edimax EW-7228APn User Manual page 6

(LAN Ports 1 to 5)
Back panel:
a.
a. Antenna Connector
Connect the included 3dBi antenna here. It is a round connector (standard
reverse SMA).
b. 10/100M LAN Ports
Connect wired computers or other network devices to these ports..
c. 5V DC
Connect the included power adapter here.
d. WPS/Reset Button
Press this button and hold for 20 seconds to reset the access point to
factory default settings. Press this button for less than 5 seconds to start
WPS functions.
Product Label
The product label on the underside of the device displays the default IP
address, username and password of the access point.
Data is being transmitted
Flashing
through the Ethernet cable
Off No connection
b.
6
c. d.