Ii-5. Repeater Mode (Wi-Fi Extender) - Edimax EW-7228APn User Manual

II-5. Repeater Mode (Wi-Fi Extender)
1. Select Repeater Mode and click "Next".
2. You will be prompted to set the SSID of this device. The SSID will be the
name of the device when you connect to it wirelessly. The default SSID is
Edimax AP, you are option to change it to the same SSID as your current
wireless network. This page also offers the option to change the password
used to access the device's browser based configuration interface.
3. The device will search for nearby wireless networks to connect to. If you
cannot find the access point you wish to connect to, click "Scan" to refresh
the list of wireless networks. Select the wireless network you wish to
connect to, and click "Next" to continue.
Note: Note the channel number used by the
wireless router or access point you select. If the
router or AP uses "Auto" for its channel selection,
then this repeater will disconnect from the router
or AP as soon as it switches channels. For best
results, check the wireless settings for your router
23