Wlan Enable (Mfc-9325Cw Wireless Network Only); E-Mail / Ifax (Available As A Download) - Brother MFC-9125CN Network User's Manual

Control panel setup

WLAN Enable (MFC-9325CW wireless network only)

If you want to use the wireless network connection, set WLAN Enable to On.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Enable.
Press OK.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.

E-mail / IFAX (available as a download)

This menu has five selections: Mail Address, Setup Server, Setup Mail RX, Setup Mail TX and
Setup Relay. As this section requires you to enter a lot of text characters, you may find that it is more
convenient to use Web Based Management and your favorite web browser to configure these settings. (See
Web Based Management on page 91.) These settings must be configured for the IFAX feature to work. (For
more details about Internet fax, see Internet fax and Scan to E-mail (E-mail server) on page 102.)
You can also access the character you want by repeatedly pressing the appropriate number key using the
machine's control panel. (For more information, see Entering Text on page 178.)
Note
In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
Mail Address
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Mail Address.
Press OK.
e
Press 1 to change. Enter the mail address (up to 60 characters).
Press OK.
f
Press Stop/Exit.
6
6
6
6
56