Brother MFC-9125CN Network User's Manual page 44

Configuring your machine for a wireless network (For MFC-9325CW)
LCD messages when using the WPS/AOSS control panel menu
LCD shows
Setting WLAN
Connecting WPS
Connecting AOSS
Connected
Connection Error
No Access Point
Connection Fail
®
(Windows )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX from
the CD-ROM.
Connection status
Searching or accessing the access
point, and downloading settings from the
access point.
Connecting the access point.
Connection succeeded.
Session overlap has been detected.
The access point detection failed.
Connection failed.
Action
—
—
—
Check that only one router or access point has
the Wi-Fi Protected Setup mode or AOSS™
mode enabled and try starting from step c again.
Move the machine closer to your access
point/router and try starting from step c again.
1 Try starting from step c again.
2 If the same message continues, reset the
machine back to the factory settings and try
again.
3
33