Printing The Network Configuration List - Brother MFC-9125CN Network User's Manual
Multi-protocol on-board ethernet multi-functional print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-9125CN:
- User manual (267 pages) ,
- Software user's manual (221 pages) ,
- Quick setup manual (48 pages)
Table of Contents
Advertisement
Control panel setup
Printing the Network Configuration List
Note
Node name: Node name appears on the Network Configuration List. The default node name is
"BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network. ("xxxxxxxxxxxx" is
your machine's MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a
(For MFC-9325CW) Press Menu. Press a or b to choose Print Reports. Press OK.
(For MFC-9125CN) Press Reports.
b
Press a or b to choose Network Config.
Press OK.
c
Press Black Start or Color Start.
Note
If the IP Address on the Nework Configuration List shows 0.0.0.0, wait for one minute and try again.
6
6
72
Advertisement
Table of Contents
Troubleshooting
