Brother MFC-9125CN Network User's Manual page 47

Configuring your machine for a wireless network (For MFC-9325CW)
h
The machine will search for your network and display a list of available SSIDs. You should see the SSID
you wrote down earlier. If the machine finds more than one network use a or b key to choose your
network, then press OK. Go to l.
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name.
Go to i.
i
Choose <New SSID> using a or b.
Press OK. Go to j.
Select SSID&Set
<New SSID>
j
Enter a new SSID. (For information how to type text, see Entering Text on page 178.)
Press OK.
SSID:
k
Press a or b to choose Infrastructure or Ad-hoc.
Press OK.
Do one of the following:
If you chose Infrastructure, go to l.
If you chose Ad-hoc, go to m.
Mode Select
Infrastructure
l
Choose the Authentication method using a or b, and press OK.
Auth. Select
Open System
Do one of the following:
If you chose Open System, go to step m.
If you chose Shared Key, go to step n.
If you chose WPA/WPA2-PSK, go to q.
If you chose LEAP, go to step r.
If you chose EAP-FAST/NONE, EAP-FAST/MSCHAP
1
Shown on the LCD as EAP-FAST/MSCHAPv2.
m
Choose the Encryption type, None or WEP using a or b, and press OK.
Encryption Type?
None
Do one of the following:
If you chose None, go to step t.
If you chose WEP, go to step n.
n
Choose the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
Set WEP KEY
KEY1:
If you chose the key which shows **********, go to step o.
If you chose a blank key, go to step p.
1
or EAP-FAST/GTC, go to step q.
3
36