Restoring The Network Settings To Factory Default - Brother MFC-9125CN Network User's Manual
Multi-protocol on-board ethernet multi-functional print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for MFC-9125CN:
- User manual (267 pages) ,
- Software user's manual (221 pages) ,
- Quick setup manual (48 pages)
Table of Contents
Advertisement
Control panel setup
Restoring the network settings to factory default
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network Reset.
Press OK.
d
Press 1 to choose Reset.
e
Press 1 to choose Yes for reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
6
6
71
Advertisement
Table of Contents
Troubleshooting
