Inserting And Removing The Card (Optional)/The Battery - Panasonic Lumix DMC-GF3 Basic Owner's Manual

Inserting and Removing the Card (optional)/the
Battery
•
Check that this unit is turned off.
•
We recommend using a Panasonic card.
Slide the release lever in the direction of
the arrow and open the card/battery
door.
•
Always use genuine Panasonic batteries.
•
If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Being careful about the battery
orientation, insert all the way until you
hear a locking sound and then check that
it is locked by lever A.
Pull the lever A in the direction of the
arrow to remove the battery.
Card: Push it securely all the way until
you hear a "click" while being careful
about the direction in which you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
B: Do not touch the connection terminals of the
card.
1:Close the card/battery door.
2:Slide the release lever in the direction
of the arrow.
Note
•
Remove the battery after use.
•
The battery will be exhausted if left for a long period of time after being charged.
•
The battery becomes warm after using it and during and after charging. The camera also
becomes warm during use. This is not a malfunction.
•
Before removing the card or battery, turn the camera off, and wait until the status indicator has
gone off completely. (Otherwise, this unit may no longer operate normally and the card itself
may be damaged or the recorded pictures may be lost.)
Preparation
- 22 -
OPEN LOCK
OPEN LOCK